The spin axis of the oval ball is set when it is angled to the right or left in order to determine its flight path.
Expression denoting an easy shot positioned right in front of the goal mouth.
See goal (ii).
Tactic used in match play to gain turning rights before an opponent enters the yard.
The pole which holds the goal above the ground.
A length of light metal chain used to locate the facing position of the goal.
To pick the chain up and re-attach it to the eyelet under the crossbar after all players have goaled out in order to ensure that the goal is returned to the facing position.
Narrow goals which make scoring more difficult.
Yards having an additional inner ring of different colored markers which define an alternative smaller yard area used in championship play.
A situation in which the ball is lodged between a stay and the netting on the outside of the goal.
A soft shot with maximum loft designed to stay in the yard if it misses the goal.
A shot for goal taken from behind the goal. The hardest shot in GolfCross®.
Short for GolfCross®.
The horizontal bar which connects the base of the two uprights.
Two differently configured yards marked out around the same goal position to provide alternative yards on a nine goal course where an eighteen goal layout is required.
Releasing the chain from the crossbar in order to turn the goal. Requesting a player to drop the chain is another way of asking them to tend the goal.
Slang term for the oval GolfCross® ball.
The fixed position that the goal mouth is facing when a player tees off. (This position is secured by the chain).
To reflect the ball when it is also angled ie., to have it leaning forward or back as well as sideways. When the ball is struck in the fangled position its flight is erratic and unpredictable.
Ball played into the goal from outside the yard.
Good field play describes a players ability to be able to consistently score field goals.
A battery operated charger attached to the center pole which provides an insulated wire around the goal with sufficient current to deter cattle from rubbing against it. When fitted, players should assume its live and avoid touching the wires.
(i) area between tee and yard.
(ii) The posts and netting into which the ball must be played.
Triangular frame which turns on the center pole and supports the uprights, stays and netting.
Completing a goal.
A ball played into the goal from the tee. .
The vector outside the yard from where the clearest shot to the goal may be taken.
Ball position in which the ball lies horizontally with its long, flatter side facing out towards the target.
Ball struck in the torpedo position, usually with a driver, creating the maximum possible amount of top spin and the highest pitch of hum. Each time the ball comes into contact with the ground and dings along, its spin rate is reduced together with the pitch of the hum. (It is possible to achieve up to six clearly defined, descending notes as the ball bounces towards its destination).
Ball rotating along its transverse axis (tumbling) which makes a humming sound that is higher in pitch the faster it rotates.
In match play, hitting the ball into the yard but keeping it at a greater distance from the goal than ones opponents ball when their ball is outside the yard, in order to gain turning rights and block them off.
Hitting onto the yard in order to receive turning rights.
A goal is locked when the wheel on the center pole is located in a valley on the position locator fixed to the goal frame.
Ground level rod which stops the center pole from turning.
Sprung device uniting a wheel on the center pole with a cog ring on the goal frame. This holds the goal in one of three equidistant positions.
Lofted shot in which the ball enters the goal through the open triangular top of the goal rather than between the uprights.
Ball placed vertically on its sharp end and tilted back so that it reflects the clubs loft.
A stroke play option in which only two goal positions are allowed the facing position and one other.
The three sectors of the yard from where only an oblique shot at goal is possible.
Series of sideways bounces taken by the ball on pitching when it has been hit while positioned at an angle to the right or left of the target.
Ball hit in the torpedo position while angled to the left or right. The ball curves one way in the air before pitching and then the other way when bouncing.
Flexible rods which provide a triangular framework for the goal netting.
Hollow rubber cone which enables the oval ball to be held at an angle. It may be used on its own or fitted onto a regular golf tee.
Turning the goal for another player and ensuring that it is locked.
Ball in horizontal position with its sharp end facing the target.
In match play, when the goal is turned against an opponent who is outside the yard. See Blocking off.
A players entitlement to turn the goal to one of three locked positions when his ball lies within the yard.
Goal with the chain unattached and therefore probably not in the facing position.
The two vertical poles which define the front edges of the goal.
Ball position in which the ball stands vertically on its sharp end.
An area around the goal designated by markers.
Painted discs or pegs which define the perimeter of the yard.
The longest club in the bag, usually the driver, used to lay between the yard markers as a quick way of determining if a players ball is within the yard.
Play within the yard.